Dobrodošli na FOSS Srbija

Free and Opensource Srbija je skup entuzijasta i ljubitelja slobodnog i otvorenog koda. Cilj nam je okupiti sve istomišljenike na jednom mestu i stvoriti najveći globalni OpenSource projekat u Srbiji i šire!

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

LinuxMint Rešeno Problem sa zvukom!

Discussion in 'Debian, LinuxMint, Ubuntu' started by dallboy, 03.04.2018.

  1. dallboy

    Korisnik

    Joined:
    26.03.2018
    Messages:
    27
    Likes Received:
    9
    Location:
    Srbija
    Okruženje:
    Cinnamon
    Sistem:
    Mint
    Pozdrav svima,instalirao sam novi mint 18.3 sylvia ali sam izgubio sam zvuk i ne znam ga vratiti.Kucao sam razne komande koje sam nalazio na forumima ali ništa nije pomoglo.Verovatno nije bilo za moju zvučnu kartu na matičnoj.Moja konfiguracija je:
    System: Host: dallboy Kernel: 4.15.0-12-generic x86_64 (64 bit gcc: 7.3.0)
    Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3)
    Distro: Linux Mint 18.3 Sylvia
    Machine: Mobo: Gigabyte model: H67MA-USB3-B3
    Bios: Award v: F8 date: 03/26/2012
    CPU: Dual core Intel Core i3-2120 (-HT-MCP-) cache: 3072 KB
    flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 13170
    clock speeds: max: 3300 MHz 1: 1596 MHz 2: 1596 MHz 3: 1596 MHz
    4: 1596 MHz
    Graphics: Card: Advanced Micro Devices [AMD/ATI] Curacao XT [Radeon R7 370 / R9 270X/370 OEM]
    bus-ID: 01:00.0
    Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
    Resolution: 1680x1050@59.95hz
    GLX Renderer: AMD PITCAIRN (DRM 2.50.0 / 4.15.0-12-generic, LLVM 5.0.0)
    GLX Version: 3.0 Mesa 17.2.8 Direct Rendering: Yes
    Audio: Card-1 Intel 6 Series/C200 Series Family High Definition Audio Controller
    bus-ID: 00:1b.0
    Card-2 Advanced Micro Devices [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
    bus-ID: 01:00.1
    Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    driver: r8169 port: de00 bus-ID: 03:00.0
    IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
    Drives: HDD Total Size: 560.2GB (1.7% used)
    ID-1: /dev/sda model: KINGSTON_SV300S3 size: 120.0GB
    ID-2: /dev/sdb model: ST3320620AS size: 320.1GB
    ID-3: /dev/sdc model: ST380817AS size: 80.0GB
    ID-4: /dev/sdd model: ST340014AS size: 40.0GB
    Partition: ID-1: / size: 17G used: 7.2G (46%) fs: ext4 dev: /dev/sdd1
    ID-2: swap-1 size: 1.02GB used: 0.00GB (0%) fs: swap dev: /dev/sdd6
    RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
    Sensors: System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A gpu: 34.0
    Info: Processes: 185 Uptime: 1:14 Memory: 1291.8/7959.9MB
    Init: systemd runlevel: 5 Gcc sys: 5.4.0
    Client: Shell (bash 4.3.481) inxi: 2.2.35
    Hvala na pomoći!
     
  2. Knez

    Korisnik

    Joined:
    12.02.2018
    Messages:
    103
    Likes Received:
    82
    Okruženje:
    Cinnamon
    Sistem:
    Mint
    koliko ja vidim ti imaš drajver za audio i za hdmi, da li si pogledao u podešavanja sistema - zvuk, da li tamo izgleda kao kod mene
     

    Attached Files:

  3. dallboy

    Korisnik

    Joined:
    26.03.2018
    Messages:
    27
    Likes Received:
    9
    Location:
    Srbija
    Okruženje:
    Cinnamon
    Sistem:
    Mint
    Kod mene je crven evo pogledaj kako izgledaju sva četiri taba
     

    Attached Files:

    • 1.png
      1.png
      File size:
      1.3 MB
      Views:
      73
    • 2.png
      2.png
      File size:
      1.3 MB
      Views:
      70
    • 3.png
      3.png
      File size:
      1.4 MB
      Views:
      67
    • 4.png
      4.png
      File size:
      1.3 MB
      Views:
      69
  4. Knez

    Korisnik

    Joined:
    12.02.2018
    Messages:
    103
    Likes Received:
    82
    Okruženje:
    Cinnamon
    Sistem:
    Mint
    2 tab ti je za mikrofon i kameru, 4 za aplikacije, da li si nešto uklanjao npr pulseaudio-module-x11, pulseaudio, Gstremer0.10-pulseaudio, Gstremer1.0-pulseaudio? da li si možda povezao TV na svoj kompjuter preko HDMI kabla? pa vidi da nije možda ostao na TV zvuk,
     
  5. dallboy

    Korisnik

    Joined:
    26.03.2018
    Messages:
    27
    Likes Received:
    9
    Location:
    Srbija
    Okruženje:
    Cinnamon
    Sistem:
    Mint
    Ne,nisam povezao sa TV-om ali zbog problema sa tastaturom logiech g15 kucao sam komandu "sudo apt remove fwupd" i sa tastaturom nemam problem ali nemam sada zvuk pa ne mogu gledati strimove na vlc plejeru (mislim mogu gledati al ne čujem ništa).Kako da reinstaliram zvučnu karticu?
     
  6. Knez

    Korisnik

    Joined:
    12.02.2018
    Messages:
    103
    Likes Received:
    82
    Okruženje:
    Cinnamon
    Sistem:
    Mint
    da li si pogledao ovo Ubuntu 16.04 Cannot Use USB Audio: fwupd Bug
    The problem turned out to be more complicated than originally thought and kept re-appearing on reboot.
    Thanks a lot to @nakasya for pointing out that it's a bug in fwupd that appeared when upgrading to Ubuntu 16.04. Refer to Problems with Audio device (ALC-889) - Ubuntu 16.04 .
    The temporary workaround until the fix is included in the main release is to run "sudo killall fwupd" and reconnect the USB audio device.
    jer što se tiče tog fwupd to je kod mene instalirano
     

    Attached Files:

  7. dallboy

    Korisnik

    Joined:
    26.03.2018
    Messages:
    27
    Likes Received:
    9
    Location:
    Srbija
    Okruženje:
    Cinnamon
    Sistem:
    Mint
    Ne pomaže kucao sam komande "sudo killall fwupd" i "sudo apt remove fwupd" pa restartovao pa instalirao u menadžeru kao kod tebe ali sve je isto.Mislim da nije uspelo jer meni zvučnik i slušalice nisu na usb nego na onaj 3,5 mm džek.
     
  8. Knez

    Korisnik

    Joined:
    12.02.2018
    Messages:
    103
    Likes Received:
    82
    Okruženje:
    Cinnamon
    Sistem:
    Mint
    Sada jedino što mi pada napamet je da probaš da instaliraš fwupd i fwupdata i da restartuješ i da probaš da ažururaš driver i da ideš na ažururanje softvera. Sada mislim kada si uklonio fwupd da je on vratio drajver za zvuk na neki početni drajver koji tebi ne odgovara
     
  9. dallboy

    Korisnik

    Joined:
    26.03.2018
    Messages:
    27
    Likes Received:
    9
    Location:
    Srbija
    Okruženje:
    Cinnamon
    Sistem:
    Mint
    ne pomaže ni to sa fwupd i fwupdata.Možda da ga ponovo instaliram pa se pojavi a taman sam ga podesio onako po svom.Probaću još malo da proguglam.Hvala u svakom slučaju na brzoj pomoći.
     

    Attached Files:

    • 14.png
      14.png
      File size:
      144 KB
      Views:
      54
  10. dallboy

    Korisnik

    Joined:
    26.03.2018
    Messages:
    27
    Likes Received:
    9
    Location:
    Srbija
    Okruženje:
    Cinnamon
    Sistem:
    Mint
    Uspeo sam!!!Sad sam pokrenuo update menager i ponudio mi neki kernel da instaliram a bio je crvenkaste boje oznake broj 4.Ko velim nemam šta da izgubim (pretpostavio sam da je rizičan) i instaliram i kad sam restarovao voila eto ga zvuk. leva kartica mi ne radi (to ne znam šta je)u sredini slušalice su OK i kroz desna kartica su zvučnici i oni rade OK.
    Hvala svima a ponajviše Knezu!
     

    Attached Files:

    • 15.png
      15.png
      File size:
      46.6 KB
      Views:
      67
    Knez likes this.
  11. bojan.1995

    Korisnik

    Joined:
    04.10.2015
    Messages:
    161
    Likes Received:
    15
    Okruženje:
    Mate
    Sistem:
    Mint
    Nakon fresh instalacije ne radi zvuk, evo ispisa:

    Code:
    aplay -L
    default
        Playback/recording through the PulseAudio sound server
    null
        Discard all samples (playback) or generate zero samples (capture)
    pulse
        PulseAudio Sound Server
    hdmi:CARD=HDMI,DEV=0
        HDA Intel HDMI, HDMI 0
        HDMI Audio Output
    hdmi:CARD=HDMI,DEV=1
        HDA Intel HDMI, HDMI 1
        HDMI Audio Output
    hdmi:CARD=HDMI,DEV=2
        HDA Intel HDMI, HDMI 2
        HDMI Audio Output
    hdmi:CARD=HDMI,DEV=3
        HDA Intel HDMI, HDMI 3
        HDMI Audio Output
    hdmi:CARD=HDMI,DEV=4
        HDA Intel HDMI, HDMI 4
        HDMI Audio Output
    dmix:CARD=HDMI,DEV=3
        HDA Intel HDMI, HDMI 0
        Direct sample mixing device
    dmix:CARD=HDMI,DEV=7
        HDA Intel HDMI, HDMI 1
        Direct sample mixing device
    dmix:CARD=HDMI,DEV=8
        HDA Intel HDMI, HDMI 2
        Direct sample mixing device
    dmix:CARD=HDMI,DEV=9
        HDA Intel HDMI, HDMI 3
        Direct sample mixing device
    dmix:CARD=HDMI,DEV=10
        HDA Intel HDMI, HDMI 4
        Direct sample mixing device
    dsnoop:CARD=HDMI,DEV=3
        HDA Intel HDMI, HDMI 0
        Direct sample snooping device
    dsnoop:CARD=HDMI,DEV=7
        HDA Intel HDMI, HDMI 1
        Direct sample snooping device
    dsnoop:CARD=HDMI,DEV=8
        HDA Intel HDMI, HDMI 2
        Direct sample snooping device
    dsnoop:CARD=HDMI,DEV=9
        HDA Intel HDMI, HDMI 3
        Direct sample snooping device
    dsnoop:CARD=HDMI,DEV=10
        HDA Intel HDMI, HDMI 4
        Direct sample snooping device
    hw:CARD=HDMI,DEV=3
        HDA Intel HDMI, HDMI 0
        Direct hardware device without any conversions
    hw:CARD=HDMI,DEV=7
        HDA Intel HDMI, HDMI 1
        Direct hardware device without any conversions
    hw:CARD=HDMI,DEV=8
        HDA Intel HDMI, HDMI 2
        Direct hardware device without any conversions
    hw:CARD=HDMI,DEV=9
        HDA Intel HDMI, HDMI 3
        Direct hardware device without any conversions
    hw:CARD=HDMI,DEV=10
        HDA Intel HDMI, HDMI 4
        Direct hardware device without any conversions
    plughw:CARD=HDMI,DEV=3
        HDA Intel HDMI, HDMI 0
        Hardware device with all software conversions
    plughw:CARD=HDMI,DEV=7
        HDA Intel HDMI, HDMI 1
        Hardware device with all software conversions
    plughw:CARD=HDMI,DEV=8
        HDA Intel HDMI, HDMI 2
        Hardware device with all software conversions
    plughw:CARD=HDMI,DEV=9
        HDA Intel HDMI, HDMI 3
        Hardware device with all software conversions
    plughw:CARD=HDMI,DEV=10
        HDA Intel HDMI, HDMI 4
        Hardware device with all software conversions
    sysdefault:CARD=PCH
        HDA Intel PCH, 92HD91BXX Analog
        Default Audio Device
    front:CARD=PCH,DEV=0
        HDA Intel PCH, 92HD91BXX Analog
        Front speakers
    surround21:CARD=PCH,DEV=0
        HDA Intel PCH, 92HD91BXX Analog
        2.1 Surround output to Front and Subwoofer speakers
    surround40:CARD=PCH,DEV=0
        HDA Intel PCH, 92HD91BXX Analog
        4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
        HDA Intel PCH, 92HD91BXX Analog
        4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
        HDA Intel PCH, 92HD91BXX Analog
        5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
        HDA Intel PCH, 92HD91BXX Analog
        5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
        HDA Intel PCH, 92HD91BXX Analog
        7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    dmix:CARD=PCH,DEV=0
        HDA Intel PCH, 92HD91BXX Analog
        Direct sample mixing device
    dsnoop:CARD=PCH,DEV=0
        HDA Intel PCH, 92HD91BXX Analog
        Direct sample snooping device
    hw:CARD=PCH,DEV=0
        HDA Intel PCH, 92HD91BXX Analog
        Direct hardware device without any conversions
    plughw:CARD=PCH,DEV=0
        HDA Intel PCH, 92HD91BXX Analog
        Hardware device with all software conversions
    host@host:~$ alsamixer
    host@host:~$ pacmd list sinks
    Memory blocks currently allocated: 16, size: 215,6 KiB.
    Memory blocks allocated during the whole lifetime: 3431775, size: 465,0 MiB.
    Memory blocks imported from other processes: 15, size: 151,7 KiB.
    Memory blocks exported to other processes: 0, size: 0 B.
    Total sample cache size: 0 B.
    Default sample spec: s16le 2ch 44100Hz
    Default channel map: front-left,front-right
    Default sink name: alsa_output.pci-0000_00_1b.0.analog-stereo
    Default source name: alsa_input.pci-0000_00_1b.0.analog-stereo
    Memory blocks of type POOL: 1 allocated/1894066 accumulated.
    Memory blocks of type POOL_EXTERNAL: 0 allocated/1659 accumulated.
    Memory blocks of type APPENDED: 0 allocated/0 accumulated.
    Memory blocks of type USER: 0 allocated/0 accumulated.
    Memory blocks of type FIXED: 0 allocated/969629 accumulated.
    Memory blocks of type IMPORTED: 15 allocated/568080 accumulated.
    28 module(s) loaded.
        index: 0
        name: <module-device-restore>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "Automatically restore the volume/mute state of devices"
            module.version = "11.1"
        index: 1
        name: <module-stream-restore>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "Automatically restore the volume/mute/device state of streams"
            module.version = "11.1"
        index: 2
        name: <module-card-restore>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "Automatically restore profile of cards"
            module.version = "11.1"
        index: 3
        name: <module-augment-properties>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "Augment the property sets of streams with additional static information"
            module.version = "11.1"
        index: 4
        name: <module-switch-on-port-available>
        argument: <>
        used: -1
        load once: no
        properties:
       
        index: 5
        name: <module-switch-on-connect>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Michael Terry"
            module.description = "When a sink/source is added, switch to it or conditionally switch to it"
            module.version = "11.1"
        index: 6
        name: <module-udev-detect>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "Detect available audio hardware and load matching drivers"
            module.version = "11.1"
        index: 7
        name: <module-alsa-card>
        argument: <device_id="0" name="pci-0000_00_03.0" card_name="alsa_card.pci-0000_00_03.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
        used: 0
        load once: no
        properties:
            module.author = "Lennart Poettering"
            module.description = "ALSA Card"
            module.version = "11.1"
        index: 8
        name: <module-alsa-card>
        argument: <device_id="1" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1">
        used: 1
        load once: no
        properties:
            module.author = "Lennart Poettering"
            module.description = "ALSA Card"
            module.version = "11.1"
        index: 9
        name: <module-bluetooth-policy>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Frédéric Dalleau, Pali Rohár"
            module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
            module.version = "11.1"
        index: 10
        name: <module-bluetooth-discover>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "João Paulo Rechi Vita"
            module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
            module.version = "11.1"
        index: 11
        name: <module-bluez5-discover>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "João Paulo Rechi Vita"
            module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
            module.version = "11.1"
        index: 12
        name: <module-native-protocol-unix>
        argument: <>
        used: -1
        load once: no
        properties:
            module.author = "Lennart Poettering"
            module.description = "Native protocol (UNIX sockets)"
            module.version = "11.1"
        index: 13
        name: <module-default-device-restore>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "Automatically restore the default sink and source"
            module.version = "11.1"
        index: 14
        name: <module-rescue-streams>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "When a sink/source is removed, try to move its streams to the default sink/source"
            module.version = "11.1"
        index: 15
        name: <module-always-sink>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Colin Guthrie"
            module.description = "Always keeps at least one sink loaded even if it's a null one"
            module.version = "11.1"
        index: 16
        name: <module-intended-roles>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "Automatically set device of streams based on intended roles of devices"
            module.version = "11.1"
        index: 17
        name: <module-suspend-on-idle>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "When a sink/source is idle for too long, suspend it"
            module.version = "11.1"
        index: 18
        name: <module-console-kit>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "Create a client for each ConsoleKit session of this user"
            module.version = "11.1"
        index: 19
        name: <module-systemd-login>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "Create a client for each login session of this user"
            module.version = "11.1"
        index: 20
        name: <module-position-event-sounds>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
            module.version = "11.1"
        index: 21
        name: <module-role-cork>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Lennart Poettering"
            module.description = "Mute & cork streams with certain roles while others exist"
            module.version = "11.1"
        index: 22
        name: <module-filter-heuristics>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Colin Guthrie"
            module.description = "Detect when various filters are desirable"
            module.version = "11.1"
        index: 23
        name: <module-filter-apply>
        argument: <>
        used: -1
        load once: yes
        properties:
            module.author = "Colin Guthrie"
            module.description = "Load filter sinks automatically when needed"
            module.version = "11.1"
        index: 24
        name: <module-x11-publish>
        argument: <display=:0.0>
        used: -1
        load once: no
        properties:
            module.author = "Lennart Poettering"
            module.description = "X11 credential publisher"
            module.version = "11.1"
        index: 25
        name: <module-x11-cork-request>
        argument: <display=:0.0>
        used: -1
        load once: no
        properties:
            module.author = "Lennart Poettering"
            module.description = "Synthesize X11 media key events when cork/uncork is requested"
            module.version = "11.1"
        index: 26
        name: <module-x11-xsmp>
        argument: <display=:0.0 session_manager=local/host:@/tmp/.ICE-unix/1606,unix/host:/tmp/.ICE-unix/1606>
        used: -1
        load once: no
        properties:
            module.author = "Lennart Poettering"
            module.description = "X11 session management"
            module.version = "11.1"
        index: 27
        name: <module-cli-protocol-unix>
        argument: <>
        used: -1
        load once: no
        properties:
            module.author = "Lennart Poettering"
            module.description = "Command line interface protocol (UNIX sockets)"
            module.version = "11.1"
    1 sink(s) available.
      * index: 0
        name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 9039
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: no
        current latency: 0,00 ms
        max request: 0 KiB
        max rewind: 0 KiB
        monitor source: 0
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 1
        configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
        card: 1 <alsa_card.pci-0000_00_1b.0>
        module: 8
        properties:
            alsa.resolution_bits = "16"
            device.api = "alsa"
            device.class = "sound"
            alsa.class = "generic"
            alsa.subclass = "generic-mix"
            alsa.name = "92HD91BXX Analog"
            alsa.id = "92HD91BXX Analog"
            alsa.subdevice = "0"
            alsa.subdevice_name = "subdevice #0"
            alsa.device = "0"
            alsa.card = "1"
            alsa.card_name = "HDA Intel PCH"
            alsa.long_card_name = "HDA Intel PCH at 0xd0734000 irq 34"
            alsa.driver_name = "snd_hda_intel"
            device.bus_path = "pci-0000:00:1b.0"
            sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
            device.bus = "pci"
            device.vendor.id = "8086"
            device.vendor.name = "Intel Corporation"
            device.product.id = "8c20"
            device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
            device.form_factor = "internal"
            device.string = "front:1"
            device.buffering.buffer_size = "65536"
            device.buffering.fragment_size = "32768"
            device.access_mode = "mmap+timer"
            device.profile.name = "analog-stereo"
            device.profile.description = "Analog Stereo"
            device.description = "Built-in Audio Analog Stereo"
            alsa.mixer_name = "IDT 92HD91BXX"
            alsa.components = "HDA:111d76e0,103c2109,00100303"
            module-udev-detect.discovered = "1"
            device.icon_name = "audio-card-pci"
        ports:
            analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: no)
                properties:
               
            analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
                properties:
                    device.icon_name = "audio-speakers"
            analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
                properties:
                    device.icon_name = "audio-headphones"
        active port: <analog-output-speaker>
    2 source(s) available.
        index: 0
        name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
        driver: <module-alsa-card.c>
        flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 1030
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        base volume: 65536 / 100% / 0,00 dB
        volume steps: 65537
        muted: no
        current latency: 0,00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
        monitor_of: 0
        card: 1 <alsa_card.pci-0000_00_1b.0>
        module: 8
        properties:
            device.description = "Monitor of Built-in Audio Analog Stereo"
            device.class = "monitor"
            alsa.card = "1"
            alsa.card_name = "HDA Intel PCH"
            alsa.long_card_name = "HDA Intel PCH at 0xd0734000 irq 34"
            alsa.driver_name = "snd_hda_intel"
            device.bus_path = "pci-0000:00:1b.0"
            sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
            device.bus = "pci"
            device.vendor.id = "8086"
            device.vendor.name = "Intel Corporation"
            device.product.id = "8c20"
            device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
            device.form_factor = "internal"
            device.string = "1"
            module-udev-detect.discovered = "1"
            device.icon_name = "audio-card-pci"
      * index: 1
        name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
        driver: <module-alsa-card.c>
        flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
        state: SUSPENDED
        suspend cause: IDLE
        priority: 9039
        volume: front-left: 10387 /  16% / -48,00 dB,   front-right: 10387 /  16% / -48,00 dB
                balance 0,00
        base volume: 6554 /  10% / -60,00 dB
        volume steps: 65537
        muted: yes
        current latency: 0,00 ms
        max rewind: 0 KiB
        sample spec: s16le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        used by: 0
        linked by: 0
        configured latency: 0,00 ms; range is 0,50 .. 371,52 ms
        card: 1 <alsa_card.pci-0000_00_1b.0>
        module: 8
        properties:
            alsa.resolution_bits = "16"
            device.api = "alsa"
            device.class = "sound"
            alsa.class = "generic"
            alsa.subclass = "generic-mix"
            alsa.name = "92HD91BXX Analog"
            alsa.id = "92HD91BXX Analog"
            alsa.subdevice = "0"
            alsa.subdevice_name = "subdevice #0"
            alsa.device = "0"
            alsa.card = "1"
            alsa.card_name = "HDA Intel PCH"
            alsa.long_card_name = "HDA Intel PCH at 0xd0734000 irq 34"
            alsa.driver_name = "snd_hda_intel"
            device.bus_path = "pci-0000:00:1b.0"
            sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
            device.bus = "pci"
            device.vendor.id = "8086"
            device.vendor.name = "Intel Corporation"
            device.product.id = "8c20"
            device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
            device.form_factor = "internal"
            device.string = "front:1"
            device.buffering.buffer_size = "65536"
            device.buffering.fragment_size = "32768"
            device.access_mode = "mmap+timer"
            device.profile.name = "analog-stereo"
            device.profile.description = "Analog Stereo"
            device.description = "Built-in Audio Analog Stereo"
            alsa.mixer_name = "IDT 92HD91BXX"
            alsa.components = "HDA:111d76e0,103c2109,00100303"
            module-udev-detect.discovered = "1"
            device.icon_name = "audio-card-pci"
        ports:
            analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
                properties:
                    device.icon_name = "audio-input-microphone"
            analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
                properties:
                    device.icon_name = "audio-input-microphone"
            analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
                properties:
               
        active port: <analog-input-internal-mic>
    7 client(s) logged in.
        index: 0
        driver: <module-systemd-login.c>
        owner module: 19
        properties:
            application.name = "Login Session c2"
            systemd-login.session = "c2"
        index: 1
        driver: <protocol-native.c>
        owner module: 12
        properties:
            application.name = "Xfce volume daemon"
            native-protocol.peer = "UNIX socket client"
            native-protocol.version = "32"
            application.process.id = "1674"
            application.process.user = "host"
            application.process.host = "host"
            application.process.binary = "xfce4-volumed"
            window.x11.display = ":0.0"
            application.language = "en_US.UTF-8"
            application.process.machine_id = "0be4b885ddb347e5bc70559303dca99f"
            application.process.session_id = "c2"
        index: 5
        driver: <module-x11-xsmp.c>
        owner module: 26
        properties:
            application.name = "XSMP Session on xfce4-session as 234268386-99d3-4d4d-b7a4-51cfc672038c"
            xsmp.vendor = "xfce4-session"
            xsmp.client.id = "234268386-99d3-4d4d-b7a4-51cfc672038c"
        index: 6
        driver: <protocol-native.c>
        owner module: 12
        properties:
            application.name = "xfce4-pulseaudio-plugin"
            native-protocol.peer = "UNIX socket client"
            native-protocol.version = "32"
            application.version = "0.4.1"
            application.id = "org.xfce.pulseaudio-plugin"
            application.icon_name = "multimedia-volume-control"
            application.process.id = "1770"
            application.process.user = "host"
            application.process.host = "host"
            application.process.binary = "wrapper-2.0"
            application.language = "en_US.UTF-8"
            window.x11.display = ":0.0"
            application.process.machine_id = "0be4b885ddb347e5bc70559303dca99f"
            application.process.session_id = "c2"
        index: 12
        driver: <protocol-native.c>
        owner module: 12
        properties:
            application.name = "Firefox"
            native-protocol.peer = "UNIX socket client"
            native-protocol.version = "32"
            application.icon_name = "firefox"
            application.version = "64.0"
            application.process.id = "2999"
            application.process.user = "host"
            application.process.host = "host"
            application.process.binary = "firefox"
            application.language = "en_US.UTF-8"
            window.x11.display = ":0.0"
            application.process.machine_id = "0be4b885ddb347e5bc70559303dca99f"
            application.process.session_id = "c2"
        index: 13
        driver: <protocol-native.c>
        owner module: 12
        properties:
            application.name = "AudioIPC Server"
            native-protocol.peer = "UNIX socket client"
            native-protocol.version = "32"
            application.process.id = "2999"
            application.process.user = "host"
            application.process.host = "host"
            application.process.binary = "firefox"
            application.language = "en_US.UTF-8"
            window.x11.display = ":0.0"
            application.process.machine_id = "0be4b885ddb347e5bc70559303dca99f"
            application.process.session_id = "c2"
            application.icon_name = "firefox"
        index: 17
        driver: <cli.c>
        owner module: 27
        properties:
            application.name = "UNIX socket client"
    2 card(s) available.
        index: 0
        name: <alsa_card.pci-0000_00_03.0>
        driver: <module-alsa-card.c>
        owner module: 7
        properties:
            alsa.card = "0"
            alsa.card_name = "HDA Intel HDMI"
            alsa.long_card_name = "HDA Intel HDMI at 0xd0730000 irq 35"
            alsa.driver_name = "snd_hda_intel"
            device.bus_path = "pci-0000:00:03.0"
            sysfs.path = "/devices/pci0000:00/0000:00:03.0/sound/card0"
            device.bus = "pci"
            device.vendor.id = "8086"
            device.vendor.name = "Intel Corporation"
            device.product.id = "0c0c"
            device.product.name = "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller"
            device.form_factor = "internal"
            device.string = "0"
            device.description = "Built-in Audio"
            module-udev-detect.discovered = "1"
            device.icon_name = "audio-card-pci"
        profiles:
            output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: no)
            output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: no)
            output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: no)
            output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5200, available: no)
            output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 100, available: no)
            output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 100, available: no)
            output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5200, available: no)
            output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 100, available: no)
            output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 100, available: no)
            output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5200, available: no)
            output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 100, available: no)
            output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 100, available: no)
            output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5200, available: no)
            output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 100, available: no)
            output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 100, available: no)
            off: Off (priority 0, available: unknown)
        active profile: <off>
        ports:
            hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
                properties:
                    device.icon_name = "video-display"
            hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
                properties:
                    device.icon_name = "video-display"
            hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
                properties:
                    device.icon_name = "video-display"
            hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
                properties:
                    device.icon_name = "video-display"
            hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
                properties:
                    device.icon_name = "video-display"
        index: 1
        name: <alsa_card.pci-0000_00_1b.0>
        driver: <module-alsa-card.c>
        owner module: 8
        properties:
            alsa.card = "1"
            alsa.card_name = "HDA Intel PCH"
            alsa.long_card_name = "HDA Intel PCH at 0xd0734000 irq 34"
            alsa.driver_name = "snd_hda_intel"
            device.bus_path = "pci-0000:00:1b.0"
            sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card1"
            device.bus = "pci"
            device.vendor.id = "8086"
            device.vendor.name = "Intel Corporation"
            device.product.id = "8c20"
            device.product.name = "8 Series/C220 Series Chipset High Definition Audio Controller"
            device.form_factor = "internal"
            device.string = "1"
            device.description = "Built-in Audio"
            module-udev-detect.discovered = "1"
            device.icon_name = "audio-card-pci"
        profiles:
            input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
            output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
            output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
            off: Off (priority 0, available: unknown)
        active profile: <output:analog-stereo+input:analog-stereo>
        sinks:
            alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Built-in Audio Analog Stereo
        sources:
            alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
            alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
        ports:
            analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
                properties:
                    device.icon_name = "audio-input-microphone"
            analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
                properties:
                    device.icon_name = "audio-input-microphone"
            analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
                properties:
               
            analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: no)
                properties:
               
            analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
                properties:
                    device.icon_name = "audio-speakers"
            analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
                properties:
                    device.icon_name = "audio-headphones"
    1 sink input(s) available.
        index: 265
        driver: <protocol-native.c>
        flags: START_CORKED
        state: CORKED
        sink: 0 <alsa_output.pci-0000_00_1b.0.analog-stereo>
        volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
                balance 0,00
        muted: no
        current latency: 70,61 ms
        requested latency: 25,01 ms
        sample spec: float32le 2ch 44100Hz
        channel map: front-left,front-right
                     Stereo
        resample method: copy
        module: 12
        client: 13 <AudioIPC Server>
        properties:
            media.name = "AudioStream"
            application.name = "AudioIPC Server"
            native-protocol.peer = "UNIX socket client"
            native-protocol.version = "32"
            application.process.id = "2999"
            application.process.user = "host"
            application.process.host = "host"
            application.process.binary = "firefox"
            application.language = "en_US.UTF-8"
            window.x11.display = ":0.0"
            application.process.machine_id = "0be4b885ddb347e5bc70559303dca99f"
            application.process.session_id = "c2"
            application.icon_name = "firefox"
            module-stream-restore.id = "sink-input-by-application-name:AudioIPC Server"
    0 source output(s) available.
    0 cache entrie(s) available.
    host@host:~$ speaker-test -Dplug:front -c2 -l5 -twav
    
    speaker-test 1.1.3
    
    Playback device is plug:front
    Stream parameters are 48000Hz, S16_LE, 2 channels
    WAV file(s)
    Playback open error: -2,No such file or directory
    host@host:~$ speaker-test -c2 -l5 -twav
    
    speaker-test 1.1.3
    
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 2 channels
    WAV file(s)
    Rate set to 48000Hz (requested 48000Hz)
    Buffer size range from 96 to 1048576
    Period size range from 32 to 349526
    Using max buffer size 1048576
    Periods = 4
    was set period_size = 262144
    was set buffer_size = 1048576
    0 - Front Left
    1 - Front Right
    Time per period = 3,031769
    0 - Front Left
    1 - Front Right
    Time per period = 3,031639
    0 - Front Left
    1 - Front Right
    Time per period = 3,031907
    0 - Front Left
    
    1 - Front Right
    Time per period = 3,030304
    0 - Front Left
    1 - Front Right
    Time per period = 3,029938
    host@host:~$ 

    Prilikom testiranja se čulo ovo Front Left i Front Right.




    UPDATE:
    Proradio, nisam siguran kako, ali nema veze. Bitno je da radi. :D